Technical Documents:
Technical Documents:
High-Resolution Directional Channel Measurements at 67 GHz and Advanced Analysis of Interactions Using Geometric Information
This paper presents results from a high-resolution channel measurement campaign at 67GHz in a street canyon in Tokyo, with focus on an extended evaluation method which incorporates map-based side information. Besides being beneficial for validating the results of the path estimation, the analysis allows the identification of main sources of interaction and the differentiation between… Read more »
Whitepapers:
Millimeter-Wave Beamforming: Antenna Arrays & Characterization
Millimeter-wave bands are of increasing interest for the satellite industry and under discussion as potential 5G bands. Antennas for 5G applications make use of the shorter element sizes at these high frequencies to incorporate a larger count of radiating elements. These antenna arrays are essential for beamforming operations that play an important part in next… Read more »
Presentations:
Industry Presentations: 5G mmWave Front-end Requirements for Fixed Wireless Basestations
Bror Peterson | Qorvo Principle Systems Engineer Bror Peterson is a principle systems engineer with Qorvo, Inc. located in Richardson Texas. He is currently focused on mmWave 5G base-station RF system analysis and product development. He received a Master of Science in Electrical Engineering degree from Virginia Tech in 2000. He has been involved with research,… Read more »
Technical Documents:
Characterization of mm-Wave Channel Sounders up to W-Band and Validation of Measurement Results
In this paper, the characterization of mm-wave channel sounders and validation of measurement data are discussed. Suitable procedures and metrics like the dynamic range and the maximum measurable path loss are proposed for this purpose. They are illustrated by using measurement data at 28 and 82GHz from back-to-back measurements in the laboratory as well as… Read more »
Application Notes:
mm-Wave Band Signal Generation and Analysis
This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Measurement results such as error vector magnitude (EVM) and adjacent channel power (ACLR) are shown. Two test setups and their measurement results on a commercial V-band transceiver module are presented
Application Notes:
Wideband mm-Wave Signal Generation and Analysis
Generation of wideband digital modulated signals in V-band and above is a challenging task and typically requires a set of multiple instruments. This application note looks into the analysis part as well. Latest signal and spectrum analyzers like the R&S®FSW67 are first to allow use in V-band up to 67 GHz without external frequency conversion.… Read more »
Webinars: